Collection: Parking Cameras

Backup cameras fog up, lose their image, or show nothing but a black screen — and they're a safety feature you notice immediately when it's gone. Used OEM cameras plug into the factory harness and restore the factory guide lines and image quality.

What to check: the lens should be clear with no internal fogging, and the image should be sharp with correct colors. Match your vehicle's camera location and connector.

Need parts for your truck? See our Ford F-150, Chevy Silverado, GMC Sierra, and Ram 1500 collections.

Related: Mirrors, Taillights

Frequently asked questions

My backup camera shows a black screen — camera or wiring?

Check the fuse and connections first. If those are good, the camera itself is the likely failure — they die from water intrusion.

Why is my camera image foggy?

Moisture inside the lens housing. It sometimes clears, but internal fogging usually means the seal has failed — replace the camera.

Do I need to calibrate a replacement camera?

Most are plug-and-play. Some vehicles with dynamic guidelines need a calibration procedure — check your service information.

Will the guide lines still show?

Yes, with an OEM camera — the guidelines are generated by the vehicle, not the camera, so they work with any compatible replacement.

Can I upgrade to a higher-resolution camera?

The display resolution is the limiting factor — a higher-res camera won't look better on the factory screen. Stick with OEM-spec.